Posted by Jim
on 9/17/2009, 5:22 pm
24.247.232.47
1. Wysong wedge chassis, NTPA cage, Dana 80 with Cutshall carrier, Wilwood calipers and rotors, Wilwood MC, Beadlock or Wysong wheels, used Cepeks, BBC plates, 10" Douglas fronts, steering, front fuel tank. Can be had as a roller with clutch, bellhousing and TRB box if desired.
2. Guenther wedge chassis, NTPA cage, Dana 80 with DT aluminum carrier, Wilwood calipers and rotors, Beadlock wheels, used Cepeks, BBC plates, 10" Douglas fronts, steering, front fuel tank. Can be had as a roller with clutch, bellhousing, and TRB box if desired.
3. 8" 3 disk Crowerglide, Chevy bolt pattern. Very few runs since rebuild by Rursch. $1100 each
4. 10" 2 disk Boninfante centrifugal clutch. Chevy bolt pattern. Very few runs since rebuild by Boninfante. $2000
5. 6" Dunn mag offset for BBC. Also has some parts to convert it to a front mount. Not used since rebuilt by Dunn. $600
6. 4.25" stroke steel BBC crankshaft. Magged and fresh polish. $400
7. Set of 6.70" aluminum rods for BBC. $400
8. Have some miscellaneous parts: master cylinders, pair of Wilwood rotors, set of 18" Wysong wheels, good pair of Firestones, fair pair of Firestones for low HP natural, brake pedals, BBC rocker covers (new Moroso fabbed and new cast aluminum), BBC marine oil pan, Mellings oil pump, BBC 3/8" pushrods, Crane 1.7 gold rocker arms, some new rod and main bearings.
E-mail is best: webbjej@cbpu.com or amr49028@msn.com
Message Thread:
« Back to thread