[ Post a Response | Pentrace message board ]
Re: Parker Duofold filling problem
Posted by Bruno on October 17, 2017, 5:00 pm, in reply to "Re: Parker Duofold filling problem"
The button is split and has flanged edges holding it in the barrel. Some rocking and pulling should get it out. It is not very long.
The pressure bar is long enough to be able to grab the end of it, although perhaps a tool such as needle nose pliers would be required. It is too long to fall into the barrel as it is already up against the section. There is a bend in the pressure bar but it is easy to coax out.
SnailMail Group |
Reader's Corner |
Submit Article |
Older Stuff ]
Copyright © 2002, 2014 pentrace.net,
All Rights Reserved