Welding.Com Message Board
lathe and mill prepared parts to be joined
Posted by BRANDON on 8/5/2014, 3:08 pm
like stated above im working on a project that requires some thinking. part one is a 3/4" bar stock with a grove(need to figure out how much thickness of groove and diameter of groove at the smallest diameter and angle of groove if necessary) part 2 is 1/2 inch plate.with a ID chamfer (to be determined). material aluminum. trying to keep the bead at a mimimum to non exsistant to the outside si fi you look at the part at the side profile you dont see the weld or if you do it is a concave radius.
Hosted for FREE by Boardhost.
Create your own free message board!